
C11型减压阀
C11 Series Pressure Reducing Valve
C11型高压单级标准流量不锈钢减压阀,单级式金属膜片调压结构:适用于高纯气体、一般腐蚀性气体,标准气体等。
C11 Series High-Pressure Single-Stage Standard Flow Stainless Steel Pressure Reducing Valve, single-stage metal diaphragm pressure regulating structure: suitable for high-purity gases, general corrosive gases, standard gases, etc.
适用范围:实验室、气体色谱仪器、石油化工、电厂设备、测试仪器设备
Application scope: laboratories, gas chromatography instruments, petrochemicals, power plant equipment, testing instrument equipment
技术参数:最大输入压力:3000psi
可控输出压力:0至15/24/35/60/90/150/240/250psi
工作温度;-20至+70℃
阀体螺纹:NPT1/4”F
泄漏率:2*10-8atm cc/sec He
Technical parameters: Maximum input pressure: 3000 psi
Controllable output pressure: 0 to 15/24/35/60/90/150/240/250 psi
Operating temperature: -20 to +70℃
Valve body thread: NPT 1/4”F
Leakage rate: 2×10-8 atm cc/sec He
部件材质:阀体、提升阀针、提升阀座:SUS316L
提升阀密封垫:PTFE/PGTFE/PEEK
膜片:SUS316L/Hc-22
Component materials: Valve body, lift valve needle, lift valve seat: SUS316L
Lift valve seal gasket: PTFE/PGTFE/PEEK
Diaphragm: SUS316L/Hc-22
产品特点:波纹式无穿孔膜片降低产品泄漏率,提高调节压力灵敏度
超纯净水清洗
进口采用不锈钢金属过滤网
采用精度1.6KL压力表
Product features: Corrugated non-porous diaphragm reduces product leakage rate and improves pressure regulation sensitivity
Washed with ultra-pure water
Inlet adopts stainless steel metal filter screen
Equipped with 1.6KL precision pressure gauge
【参考】为产品改良而未提前通知变更的尺寸,请于我公司联系了解
[Reference] For size changes due to product improvement without prior notice, please contact our company for details.
【注】1、使用压力应该在压力表全量程的60%以内
2、1MPA=10bar=9.87atm=145.03psig=10.2kg/cm²=7500mmHg
[Note] 1. The operating pressure should be within 60% of the full scale of the pressure gauge.
2. 1 MPA = 10 bar = 9.87 atm = 145.03 psig = 10.2 kg/cm² = 7500 mmHg
×