
G01型减压阀
G01 Gas regulators
G01型高压单级标准流量减压阀,单级式调压结构;适用于非腐蚀性气体等。
G01 High-Pressure Single-Stage Standard Flow Gas regulators Single-stage pressure regulation structure; suitable for non-corrosive gases, etc.
适用范围
实验室
分析仪器
一般工业气体
工厂设备
Applications
Laboratories
Analytical instruments
General industrial gases
Factory equipment
技术参数
最大输入压力:3000 psig
可控输出压力:0至15/24/35/60/90/150/240/350 psig
工作温度:-10至+60℃
阀体螺纹: NPT 1/4" F
Technical Specifications
Maximum inlet pressure: 3000 psig
Controlled outlet pressure: Adjustable from 0 to 15/24/35/60/90/150/240/350 psig
Operating temperature: -10 to +60°C
Valve body thread: NPT 1/4" F
部件材质
阀体、提升阀针、提升阀座:HPb59-1
提升阀密封垫: NBR / EPDM
膜片: NBR / EPDM
Material Composition
Valve body: HPb59-1 (high-lead brass)
valve needle, valve seat: SUS316L/SUS304
Valve seal: PCTFE/PCTFE
Diaphragm: NBR / EPDM
外形安装尺寸 Installation Dimensions
产品特点
单级式调压结构
纯净水清洗
进口采用不锈钢金属过滤网,带前面板安装孔
采用精度1.6KL压力表
Features
Single-stage pressure regulation design
Purified water cleaning process
Inlet equipped with stainless steel mesh filter and front panel mounting holes
Precision 1.6KL pressure gauge
【参考】为产品改良而未提前通知变更的尺寸,请与我公司联系了解。
Additional Notes: For customized modifications or dimensional changes, contact our company for confirmation
【注】1、使用压力应该在压力表全量程的60%以内。
2、1MPa=10bar=9.87atm=145.03psig=10.2kg/cm²=7500mmHg
Notes
1. Operating pressure should be within 60% of the full scale** of the pressure gauge.
2. Unit conversion: 1 MPa = 10 bar = 9.87 atm = 145.03 psig = 10.2 kg/cm² = 7500 mmHg.
×